Forestry trailer 6 tonnes with crane 4.7 m

Two-lever valve block and hydraulic stabilisers as standard.

For delivery information, contact a seller at 46 511 242 50
SKU
21-SV60/GL47

A versatile forestry trailer that works well with tractors 40 hp or more

Kellfri's forestry trailers and cranes are powerfully dimensioned forestry rigs with optimum manoeuvrability and maximum range of movement. Created by our designers to be efficient in the forest without compromising on safety.

The safety headboard is more than sufficiently sized to protect the operator. All hydraulics and hoses are built in and guarded to minimise the risk of external damage.

Plenty of free space below the trailer to allow it to easily pass over any obstacles and a terrain-friendly bogie equipped with 11.5/80-15.3 wheels. The trailer has a low centre of gravity and hydraulic stabilisers for stable loading, unloading and operation. Articulated steering with one cylinder.

The crane is equipped with a bent lifting arm providing maximum lifting capacity in flat ground positions. Top-mounted lift cylinders in protected position. The interior hoses in the lifting arm and articulated boom are protected from external damage during operation.

The trailer is equipped as standard with articulated tow bar, parking jack, 2-lever valve block, hydraulic stabilisers, fully rotating rotator. When you buy a Kellfri forestry trailer, it will be supplied with oil in the system, fully assembled, test driven and ready for use.

The forestry trailer requires one return and one double-acting hydraulic outlet on the tractor. The trailer is supplied with four hydraulic ½ inch, quick coupling male hoses. The trailer is not equipped with brakes.

The grapple loader valve is available in three designs:

• 2-lever: manual valve block BLB, supplied as standard

• 2-lever, el. on/off: power-operated grapple and extension boom at a reduced price (applies only when purchasing trailer). For more information, contact one of our expert sales staff.

• Lightweight valve block, el. on/off: two-lever with power-operated grapple. extension boom and stabilisers. Reduced price (applies only when purchasing trailer). For more information, contact one of our expert sales staff.

The valve is not suitable for John Deere-type constant pressure systems.

When purchasing: Loading ramp is required when unloading.

The trailer in the images may be equipped with additional equipment.

Here you can see a film about our timber trailer SV60/GL47

More Information
Brakes No
Central beam 140 x140 mm
Ground clearance 520 mm
Headboard 1,090 mm (height)
Gripping area 0.18 m²
Grapple 1,000 mm (width)
Wheels 11.5/80-15.3
Hydraulic stabilisers Standard
Load width 1,100 mm (bottom), 1,560 mm (top)
Swivel tow bar eye Yes
Lifting capacity at 4.7 m: 300 kg
Max. load 6,000 kg
Articulated steering with one cylinder Yes
Recommended power requirement 30-60 hp
Recommended oil flow 20-45 l/min
Crane reach 4,700 mm
Fully rotating rotator Standard
Stabiliser Standard
Bolsters 4
System pressure 17 Mpa
Total width 2,000 mm
Total length 5,400 mm
Transport case No
Valve block, 2-lever Standard
Weight 1,600 kg
Winch Options
Slewing cylinders, slewing house crane 4
We found other products you might like!

Videos
  1. HP filter incl. indicator
    HP filter incl. indicator
  2. Grapple accessory for bushes and saplings
    Grapple accessory for bushes and saplings
  3. Complete winch with 1,400 kg pulling force
    Complete winch with 1,400 kg pulling force
  4. Tiltable floor for forestry trailer  SV60
    Tiltable floor for forestry trailer SV60
  5. Radio remote-controlled hydraulic winch with 1,000 kg pulling force
    Radio remote-controlled hydraulic winch with 1,000 kg pulling force
  6. ACP Piston accumulator
    ACP Piston accumulator
  7. Brush grapple incl. hydraulic hose and bolts
    Brush grapple incl. hydraulic hose and bolts
  8. Insert bucket for grapple 18
    Insert bucket for grapple 18