Forestry trailer 8 tonnes with crane 5.3 m

Forestry trailer 8 tonnes with 5.3 m crane. 35 m winch and three-point linkage on the crane.

For delivery information, contact a seller at 46 511 242 50
SKU
21-SV80/GL53

Powerfully dimensioned rig with optimum manoeuvrability and maximum range of movement.

• Ground clearance 50 cm
• Crane reach 5.3 m
• Lifting capacity at 5.3 m: 400 kg
• Fully rotating rotator and articulated steering are standard
• Gripping area 0.21 m²


Forestry trailer and crane created by our designers to be efficient in the forest without compromising on safety.

The safety headboard is more than sufficiently sized to protect the operator. All hydraulics and hoses are built in and guarded to minimise the risk of external damage.

Plenty of free space below the trailer to allow it to easily pass over any obstacles and a terrain-friendly bogie. The trailer has a low centre of gravity and hydraulic stabilisers for stable loading, unloading and operation. Articulated steering with one cylinder.

The crane is equipped with a bent lifting arm providing maximum lifting capacity in flat ground positions. Top-mounted lift cylinders in protected position. The interior hoses in the lifting arm and articulated boom are protected from external damage during operation. Double rotation cylinders.

The trailer is equipped as standard with winch, articulated tow bar, parking jack, 2-lever valve block, hydraulic stabilisers, fully rotating rotator, rotator link with brake. When you buy a Kellfri timber trailer, it will be supplied with oil in the system, fully assembled, test driven and ready for use.

The forestry trailer requires one return and one double-acting hydraulic outlet on the tractor. The forestry trailer is supplied with four hydraulic ½ inch, quick coupling male hoses. The trailer can be additionally equipped with a hydraulic brake.

The grapple loader valve is available in three designs:

• 2-lever: manual valve block, supplied as standard

• 2-lever, el. on/off: power-operated grapple and extension boom at a reduced price (applies only when purchasing trailer). For more information, contact one of our expert sales staff.

• Lightweight valve block, el. on/off: two-lever with power-operated grapple. extension boom and stabilisers. Reduced price (applies only when purchasing trailer). For more information, contact one of our expert sales staff.

When purchasing: Loading ramp is required when unloading.

This product has to be assembled by Kellfri's staff. For delivery information, contact a salesperson on +46 (0)511 242 50.

Here you can see a film about our timber trailer SV90/GL63

More Information
Brakes Options
Central beam 150 x 150 mm
Ground clearance 500 mm
Headboard 1,250 mm (height)
Gripping area 0.21 m²
Grapple 1,250 mm (width)
Wheels 11.5/80 -15.3
Hydraulic stabilisers Standard
Load width internally 950 mm (bottom), 1,750 mm (top)
Swivel tow bar eye Yes
Lifting capacity at 5.3 m: 400 kg
Max. load 8,000 kg
Articulated steering with one cylinder Yes
Recommended power requirement 35-65 hp
Recommended oil flow 25-50 l/min
Crane reach 5,300 mm
Fully rotating rotator Standard
Stabiliser Standard
Bolsters 4
System pressure 18 Mpa
Total width 2,100 mm
Total length 5,400 mm
Transport case Standard
Valve block, 2-lever Standard
Weight 2,200 kg
Winch Standard
Slewing cylinders, slewing house crane 4
We found other products you might like!
Videos
  1. LED work light incl. 20 cm cable
    LED work light incl. 20 cm cable
  2. Rearview camera incl. monitor and 20 m connection cable
    Rearview camera incl. monitor and 20 m connection cable
  3. Wire pulley
    Wire pulley
  4. Timber tongs
    Timber tongs
  5. Brush grapple incl. hydraulic hose and bolts
    Brush grapple incl. hydraulic hose and bolts
  6. HP filter incl. indicator
    HP filter incl. indicator
  7. ACP Piston accumulator
    ACP Piston accumulator
  8. Remote radio control for hydraulic winch
    Remote radio control for hydraulic winch
  9. Insert bucket for grapple 21
    Insert bucket for grapple 21