Forestry trailer 9 tonnes with parallel crane 5.7 m
Forestry trailer 9 tonnes with parallel crane 5.7 m. Two-lever valve block and 35 m winch.
Powerful forestry trailer with wide wheels, robust parallel crane
• Ground clearance 52 cm
• Wheel 400/60-15.5
• Crane reach 5.7 m
• Lifting capacity at 5.7 m: 450 kg
• Fully rotating rotator and articulated steering are standard
• Gripping area 0.21 m²
Kellfri's forestry trailer and crane is a powerfully dimensioned rig with optimum manoeuvrability and maximum range of movement. Created by our designers to be efficient in the forest without compromising on safety.
The safety headboard is more than sufficiently sized to protect the operator. All hydraulics and hoses are built in and guarded to minimise the risk of external damage.
Plenty of free space below the trailer to allow it to easily pass over any obstacles and a terrain-friendly bogie equipped with 400/60-15.5 wheel. The trailer has a low centre of gravity and hydraulic stabilisers for stable loading, unloading and operation. Articulated steering with one cylinder.Â
Easy-to-handle, strong and versatile crane with parallel boom operation
The unique movement offered by the parallel boom operation in combination with the two-lever valve block system provides you with an easy-to-handle, powerful and flexible crane, fitted with a winch as standard. Parallel boom operation makes the crane head move in a straight horizontal line when the first boom cylinder is activated. This makes the crane extremely easy to manoeuvre and work close to crane/trailer safer.
The parallel crane can also cope with a lower oil flow allowing it to be used on tractors with a lower pump capacity. Protected hydraulics and robust design in combination with an ergonomic two-lever valve block system and the crane's gentle movement pattern make work more fun and more efficient.
The crane can meet any requirement on the farm by fitting for instance a grapple, brush grapple or energy grapple.
When you buy a Kellfri timber trailer, it will be supplied with oil in the system, fully assembled, test driven and ready for use. The forestry trailer requires one return and one double-acting hydraulic outlet on the tractor.Â
The forestry trailer is supplied with four hydraulic ½ inch, quick coupling male hoses. The trailer can be additionally equipped with a hydraulic brake.
The grapple loader valve is available in three designs:
• 2-lever: manual valve block, supplied as standard
• 2-lever, el. on/off: power-operated grapple and extension boom at a reduced price (applies only when purchasing trailer). For more information, contact one of our expert sales staff.
• Lightweight valve block, el. on/off: two-lever with power-operated grapple. extension boom and stabilisers. Reduced price (applies only when purchasing trailer). For more information, contact one of our expert sales staff.
When purchasing: Loading ramp is required when unloading.
Here you can see a film about our timber trailer with parallel crane
| Brakes | Options |
|---|---|
| Central beam | 150 x 150 mm |
| Ground clearance | 520 mm |
| Headboard | 1,250 mm (height) |
| Gripping area | 0.21 m² |
| Grapple | 1,250 mm (width) |
| Wheels | 400/60-15.5 |
| Hydraulic stabilisers | Standard |
| Load width | internally 950 mm (bottom), 1,750 mm (top) |
| Swivel tow bar eye | Yes |
| Lifting capacity | at 5.7 m: 450 kg |
| Max. load | 9,000 kg |
| Articulated steering with one cylinder | Yes |
| Recommended power requirement | 40-80 hp |
| Recommended oil flow | 25-40 l/min |
| Crane reach | 5,700 mm |
| Fully rotating rotator | Standard |
| Stabiliser | Standard |
| Bolsters | 6 |
| System pressure | 18 Mpa |
| Total width | 2,200 mm |
| Total length | 5,400 mm |
| Transport case | Standard |
| Valve block, 2-lever | Standard |
| Weight | 2,119 kg |
| Winch | Standard |
| Slewing cylinders, slewing house crane | 4 |
